ASME B16.5 ASTM B564 UNS N06600 WNRTJ Flange SCH40S DN150 150#
- PRODUCT DETAIL
Type: UNS N06600 WNRTJ Flange
Material: Inconel 600 (UNS N06600/Alloy 600)
Size: 6″ (DN150)
Class/Pressure: 150#
Wall Thickness: SCH40S
Standard: ASME B16.5
China Weld Neck Flange Manufacturer Yaang offers ASME B16.5 ASTM B564 UNS N06600 WNRTJ Flange, SCH40S, DN150, 150#.
What is Inconel 600?
Inconel 600 is a nickel chromium alloy, which has good oxidation resistance at high temperature and good corrosion resistance in Carburizing and chlorine containing environment.
Inconel 600 is a nichrome alloy designed for low to high temperatures of 2000 degrees Fahrenheit (1093 degrees Celsius). The high nickel content of the alloy enables it to maintain a considerable resistance under reduction conditions and to resist the corrosion of a variety of organic and inorganic compounds. The content of nickel makes it have excellent resistance to chloride ion stress corrosion cracking, and also provides excellent resistance to alkaline solution.
Its chromium content makes the alloy resistant to sulfur compounds and various oxidation environments. The chromium content of the alloy makes it superior to industrial pure nickel under oxidation conditions. In strong oxidizing solutions, such as hot concentrated nitric acid, the resistance of 600 is very poor. Alloy 600 is relatively resistant to most neutral and alkaline salt solutions and is used in some corrosive environments. The alloy resists a mixture of steam and steam, air and carbon dioxide.
Chemical Composition, % of Inconel 600 (UNS N06600/Alloy 600)
| Standard | Grade | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Chemical composition % | |||||||||||
| Ni+Co | Cr | Fe | Mn | Si | Cu | Al | Ti | C | P | S | |
| UNS | N 06600; Alloy 600 | ||||||||||
| 72 | 14-17 | 6-10 | <1 | <0,5 | <0,5 | <0,15 | |||||
| EN | 2.4816 | ||||||||||
| 72 | 14-17 | 6-10 | <1,0 | <0,5 | <0,5 | <0,3 | <0,3 | 0,05-0,15 | <0,02 | <0,015 | |
Mechanical Property of Inconel 600 (UNS N06600/Alloy 600)
|
Product Form
|
Condition
|
Tensile (ksi)
|
.2% Yield (ksi)
|
Elongation (%)
|
Hardness (HRB)
|
|
Rod & Bar
|
Cold-Drawn
|
80-100
|
25-50
|
35-55
|
65-85
|
|
Rod & Bar
|
Hot-Finished
|
80-100
|
30-50
|
35-55
|
65-85
|
|
Tube & Pipe
|
Hot-Finished
|
75-100
|
30-50
|
35-55
|
–
|
|
Tube & Pipe
|
Hot-Finished
|
80-100
|
25-50
|
35-55
|
88 Max
|
|
Plate
|
Hot-Rolled
|
80-105
|
30-50
|
35-55
|
65-85
|
|
Sheet
|
Cold-Drawn
|
80-100
|
30-45
|
35-55
|
88 Max
|
Dimensions of WNRTJ Flange 150LB
| Size in Inch | Size in mm | Outer Dia. | Flange Thickness | Hub OD | Weld Neck OD | Welding Neck Length | RTJ RF Dia | RTJ RF Height | PCD | RTJ Pitch dia | RTJ Depth | RTJ Width | Bore |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | B | C | D | E | F | G | H | I | J | K | L | ||
| 1/2 | 15 | 90 | 9.6 | 30 | 21.3 | 46 | N/A | N/A | 60.3 | N/A | N/A | N/A | Welding Neck bore is derived from the pipe schedule |
| 3/4 | 20 | 100 | 11.2 | 38 | 26.7 | 51 | N/A | N/A | 69.9 | N/A | N/A | N/A | |
| 1 | 25 | 110 | 12.7 | 49 | 33.4 | 54 | 63.5 | 6.35 | 79.4 | 47.63 | 6.35 | 8.74 | |
| 1 1/4 | 32 | 115 | 14.3 | 59 | 42.2 | 56 | 73 | 6.35 | 88.9 | 57.15 | 6.35 | 8.74 | |
| 1 1/2 | 40 | 125 | 15.9 | 65 | 48.3 | 60 | 82.5 | 6.35 | 98.4 | 65.07 | 6.35 | 8.74 | |
| 2 | 50 | 150 | 17.5 | 78 | 60.3 | 62 | 102 | 6.35 | 120.7 | 82.55 | 6.35 | 8.74 | |
| 2 1/2 | 65 | 180 | 20.7 | 90 | 73 | 68 | 121 | 6.35 | 139.7 | 101.6 | 6.35 | 8.74 | |
| 3 | 80 | 190 | 22.3 | 108 | 88.9 | 68 | 133 | 6.35 | 152.4 | 114.3 | 6.35 | 8.74 | |
| 3 1/2 | 90 | 215 | 22.3 | 122 | 101.6 | 70 | 154 | 6.35 | 177.8 | 131.78 | 6.35 | 8.74 | |
| 4 | 100 | 230 | 22.3 | 135 | 114.3 | 75 | 171 | 6.35 | 190.5 | 149.23 | 6.35 | 8.74 | |
| 5 | 125 | 255 | 22.3 | 164 | 141.3 | 87 | 194 | 6.35 | 215.9 | 171.45 | 6.35 | 8.74 | |
| 6 | 150 | 280 | 23.9 | 192 | 168.3 | 87 | 219 | 6.35 | 241.3 | 193.68 | 6.35 | 8.74 | |
| 8 | 200 | 345 | 27 | 246 | 219.1 | 100 | 273 | 6.35 | 298.5 | 247.65 | 6.35 | 8.74 | |
| 10 | 250 | 405 | 28.6 | 305 | 273 | 100 | 330 | 6.35 | 362 | 304.8 | 6.35 | 8.74 | |
| 12 | 300 | 485 | 30.2 | 365 | 323.8 | 113 | 406 | 6.35 | 431.8 | 381 | 6.35 | 8.74 | |
| 14 | 350 | 535 | 33.4 | 400 | 355.6 | 125 | 425 | 6.35 | 476.3 | 396.88 | 6.35 | 8.74 | |
| 16 | 400 | 595 | 35 | 457 | 406.4 | 125 | 483 | 6.35 | 539.8 | 454.03 | 6.35 | 8.74 | |
| 18 | 450 | 635 | 38.1 | 505 | 457.2 | 138 | 546 | 6.35 | 577.9 | 517.53 | 6.35 | 8.74 | |
| 20 | 500 | 700 | 41.3 | 559 | 508 | 143 | 597 | 6.35 | 635 | 558.8 | 6.35 | 8.74 | |
| 24 | 600 | 815 | 46.1 | 663 | 610 | 151 | 711 | 6.35 | 749.3 | 673.1 | 6.35 | 8.74 |
Dimensions of Class 150 WNRTJ Flange Stud & Bolt
| RTJ Root Radius | Ring no | Distance Between Flanges | No of Bolts | Bolt Size UNC | Machine Bolt Length | RTJ Stud Length | Hole Size | ISO Stud Size |
|---|---|---|---|---|---|---|---|---|
| 0.8 | N/A | N/A | 4 | 1/2 | 50 | N/A | 5/8 | M14 |
| 0.8 | N/A | N/A | 4 | 1/2 | 50 | N/A | 5/8 | M14 |
| 0.8 | 15 | 4 | 4 | 1/2 | 55 | 75 | 5/8 | M14 |
| 0.8 | 17 | 4 | 4 | 1/2 | 55 | 85 | 5/8 | M14 |
| 0.8 | 19 | 4 | 4 | 1/2 | 65 | 85 | 5/8 | M14 |
| 0.8 | 22 | 4 | 4 | 5/8 | 70 | 95 | 3/4 | M16 |
| 0.8 | 25 | 4 | 4 | 5/8 | 75 | 100 | 3/4 | M16 |
| 0.8 | 29 | 4 | 4 | 5/8 | 75 | 100 | 3/4 | M16 |
| 0.8 | 33 | 4 | 8 | 5/8 | 75 | 100 | 3/4 | M16 |
| 0.8 | 36 | 4 | 8 | 5/8 | 75 | 100 | 3/4 | M16 |
| 0.8 | 40 | 4 | 8 | 3/4 | 85 | 110 | 7/8 | M20 |
| 0.8 | 43 | 4 | 8 | 3/4 | 85 | 115 | 7/8 | M20 |
| 0.8 | 48 | 4 | 8 | 3/4 | 90 | 120 | 7/8 | M20 |
| 0.8 | 52 | 4 | 12 | 7/8 | 100 | 125 | 1 | M24 |
| 0.8 | 56 | 4 | 12 | 7/8 | 100 | 135 | 1 | M24 |
| 0.8 | 59 | 3 | 12 | 1 | 115 | 145 | 1 1/8 | M27 |
| 0.8 | 64 | 3 | 16 | 1 | 115 | 145 | 1 1/8 | M27 |
| 0.8 | 68 | 3 | 16 | 1 1/8 | 125 | 160 | 1 1/4 | M30 |
| 0.8 | 72 | 3 | 20 | 1 1/8 | 140 | 170 | 1 1/4 | M30 |
| 0.8 | 76 | 3 | 20 | 1 1/4 | 150 | 185 | 1 3/8 | M33 |
NEXT： ASTM B167 UNS N06600 Seamless Pipe 60.3*5.54*2700MM
