China piping solution supplier: www.epowermetals.com

AWWA C207-07 ASTM A182 Alloy 316L Ring Type Slip-On Flange 48″ Class F (300 psi)

Standard AWWA C207
Size range: DN1200 (48")
Pressure range: 300 psi
Material: F316L (UNS S31603)
Flange Facing Types: Flat Face (FF)
Used in: Oil, Offshore, Water, Ship, Natural Gas, Power, Pipe Projects etc

  • PRODUCT DETAIL

Type: 316L Ring Type Slip-On Flange
Material: F316L (UNS S31603)
Size: DN1200 (48″)
Standard: AWWA C207
Ends: Flat Face

AWWA Flange Standards differ from ANSI (American National Standards Institute) and ASME (American Society of Mechanical Engineers) certifications in a variety of ways, the most important being their specificity: AWWA standards evaluate properties that particularly affect potable water use, as opposed to broader industrial flange applications. American Water Works Association (AWWA) is an international non-profit, scientific and educational association founded to improve water quality and supply. Established in 1881, it has a membership (as of 2012) of around 50,000 members worldwide.

Chemical Composition and Mechanical Property for 316L

Steel Grade

Chemical Composition

Mechanical Performance

C(Max)

Si(Max)

Mn(Max)

P(Max)

S(Max)

Ni

Cr

N(Max)

Mo

Tensile Strength
(Min)

Yield Strength
(Min)

Mpa

Mpa

316L

0.03

0.75

2.00

0.045

0.03

10.0–14.0

16.0–18.0

0.1

2.00–3.00

485

170

20200804020342 18749 - AWWA C207-07 ASTM A182 Alloy 316L Ring Type Slip-On Flange 48" Class F (300 psi)

The pressure to atmospheric temperature ratio is 300 psi.

Dimensions in inches


Nominal
Pipe Size

Outer Ø
(OD)

Inner Ø
(ID)
No. of
holes
Ø
screw
Ø
Circle such
(BC)
Thickness
(T)
Weight
(lbs)
4 10.00 4.57 8 0.750 7.88 1.13 18.30
5 11.00 5.66 8 0.750 9.25 1.21 22.30
6 12.50 6.73 12 0.750 10.63 1.31 29.70
8 15.00 8.73 12 0.875 13.00 1.31 39.90
10 17.50 10.88 16 1,000 15.25 1.50 56.00
12 20.50 12.88 16 1,125 17.75 1.63 83.20
14 23.00 14.19 twenty 1,125 20.25 1.94 127.90
16 25.50 16.19 twenty 1,250 22.50 2.14 166.80
18 28.00 18.19 24 1,250 24.75 2.25 204.20
twenty 30.50 20.19 24 1,250 27.00 2.33 247.40
22 33.00 22.19 24 1,250 29.25 2.50 306.70
24 36.00 24.19 24 1,500 32.00 2.69 387.60
26 38.25 28 1,750 34.50 3.00
28 40.75 28 1,750 37.00 3.13
30 43.00 28 1,750 39.25 3.15
32 45.25 28 1,750 41.50 3.25
3. 4 47.50 28 1,750 43.50 3.38
36 50.00 32 2,000 46.00 3.46
38 52.25 32 2,000 48.00 3.50
40 54.25 36 2,000 50.25 3.63
42 57.00 36 2,000 52.75 3.81
44 59.25 36 2,000 55.00 4.00
46 61.50 40 2,000 57.25 4.13
48 65.00 40 2,125 60.75 4.50

Notes:
1. The inner diameter of the Ring type flanges can be increased or chamfered to accommodate the outer diameter of the pipe that exceeds the nominal value.
2. Metric Conversion:
  Nominal Pipe Size [in] x 25 = [mm]
  Dimensions [in] x 25.4 = [mm]
  Pressure [psi] x 6,895 = [kPa]

Dimensional tolerances

Ring type Slip-on flanges and Blind flanges HUB type slip-on flanges
O.D. <=24″ +/- 0.6″(1.6mm) O.D. <=24″ +/- 0.6″(1.6mm)
>24″ +/- .12″(3.2mm) >24″ +/- .12″(3.2mm)
I.D. Socket-Welding
10″ and Samller

+.03″(0.8mm),-0″

I.D. 10″ and Samller +.03″(0.8mm)
Slip-on and

Lap Joint

12″ and Larger

+.06″(1.6mm),-0″

12″-18″ +/-.06″(1.6mm)
20″-42″
+.12″(3.2mm)

+.06″(1.6mm)

O.D. of Hub <=12″
+.09″(2.4mm),

-.06″(1.6mm)

Diameter of

Contact Face

0.06″ Raised Face +/-.03″(0.8mm)
14″-42″ +/-.12″(3.2mm)
Diameter of Contact face 0.06″ Raised Face +/- .03″(0.8mm) Diameter of Hub at base X<=24″ +/-.06″(1.6mm)
X>24″ +/-.12″(3.2mm)
Deameter of Contact face <=10″
+.03″(0.8mm),

-0″

Diameter of Hub at point of Welding <=5″
+.09″(2.4mm),

-.03″(0.8mm)

12″-42″
+.06″(1.6mm),

-0″

>=6″
+.16″(4.0mm),

-.03″(0.8mm)

Drilling Bolt Circle
1/2“-24”

/26″-42″

Drilling Bolt Circle
1/2“-24”

/26″-42″

+/-.06″(1.6mm)

+/-.06″

+/-.06″(1.6mm)

+/-.06″

Bolt hole

spacing

+/-.03″(0.8mm)
Bolt hole

spacing

+/-.03″(0.8mm)
Eccentricity of Bolt circle with respect to bore
.03″ Max.

(0.8mm)

Eccentricity of Bolt circle with respect to bore
.03″ Max.

(0.8mm)

Thickness 18″& Small +.12″(3.2mm),-0″ Thickness 18″& Small +.12″(3.2mm),-0″
20″-42″ +.19″(1.6mm) 20″-42″ +.19″(1.6mm)
Length Thru Hub <=10″ +/-.06″(1.6mm) Length Thru Hub <=10″ +/-.06″(1.6mm)
12″-42″ +/1.12″(3.2mm) 12″-42″ +/1.12″(3.2mm)

These tolerances are a part of ANSI B16.5 and AWWA C207-01 Sec. 4.2 except where noted otherwise.  The limits given are maximum. Rigid inspection procedure assures the maintenance of high standards of accuracy in regular day to day production.

Summary
awwa c207 07 astm a182 alloy 316l ring type slip on flange 48 class f 300 psi - AWWA C207-07 ASTM A182 Alloy 316L Ring Type Slip-On Flange 48" Class F (300 psi)
Author Rating
1star - AWWA C207-07 ASTM A182 Alloy 316L Ring Type Slip-On Flange 48" Class F (300 psi)1star - AWWA C207-07 ASTM A182 Alloy 316L Ring Type Slip-On Flange 48" Class F (300 psi)1star - AWWA C207-07 ASTM A182 Alloy 316L Ring Type Slip-On Flange 48" Class F (300 psi)1star - AWWA C207-07 ASTM A182 Alloy 316L Ring Type Slip-On Flange 48" Class F (300 psi)1star - AWWA C207-07 ASTM A182 Alloy 316L Ring Type Slip-On Flange 48" Class F (300 psi)
Aggregate Rating
5 based on 1 votes
Brand Name
Yaang
Product Name
AWWA C207-07 ASTM A182 Alloy 316L Ring Type Slip-On Flange 48" Class F (300 psi)
USD 1-9999
Product Availability
Pre-Order Only
PREV
NEXT
Inquery now

SUBSCRIBE TO OUR NEWSLETTER

FOLLOW US

YouTube
العربية简体中文繁體中文NederlandsEnglishFrançaisDeutschItaliano日本語한국어LatinPortuguêsРусскийEspañolTürkçe
  • Email me
    Mail to us