Best china piping solution supplier: www.epowermetals.com

DIN 2576 A182 F304L Brida Plana 1 Inch PN16

Standard DIN 2576
Size range: 1" (DN25)
Pressure range: PN16
Material: F304L (UNS S30403/1.4307)
Flange Facing Types: Flat Face(FF)
Used in: Oil, Offshore, Water, Ship, Natural Gas, Power, Pipe Projects etc

  • PRODUCT DETAIL

Type: DIN 2576 Brida Plana
Material: F304L (UNS S30403/1.4307)
Size: 1″ (DN25)
Pressure: PN16
Standard: DIN 2576

Chemical Composition and Mechanical Property for 304/304L

Steel Grade

Chemical Composition

Mechanical Performance

C(Max)

Si(Max)

Mn(Max)

P(Max)

S(Max)

Ni

Cr

N

Mo

Tensile Strength
(Min)

Yield Strength
(Min)

Mpa

Mpa

304

0.08

0.75

2.00

0.045

0.03

8.0–10.5

18.0–20.0

0.1

/

515

205

304L

0.03

0.75

2.00

0.045

0.03

8.0–12.0

18.0–20.0

0.1

/

485

170

PLATE FLANGE DIN 2576 PN10

20191222063727 68920 - DIN 2576 A182 F304L Brida Plana 1 Inch PN16

Germany standard flange DIN 2576 for soldering or welding Nominal Pressure 10
Flansche, glatt zum löten oder schweißen DIN 2576 Nenndruck 10
Brides plates a souder DIN 2576 pression nominale 10
Pipe Flange Screws Weight
(7,85 Kg/dm3)
Rated
Diameter
d1 d5 D b c k Holes Thread d2 Kg
ISO Series 1 DIN Series 2
15 20 21 95 14 5 65 4 M 12 14 0,675
21,3 22 0,669
20 25 26 105 16 5 75 4 M 12 14 0,749
26,9 27,6 0,936
25 30 31 115 16 5 85 4 M 12 14 1,14
33,7 34,4 1,11
32 38 39 140 16 5 100 4 M 16 18 1,66
42,4 43,1 1,62
40 44,5 45,5 150 16 5 110 4 M 16 18 1,89
48,3 49 1,86
50 57 58,1 165 18 6 125 4 M 16 18 2,51
60,3 61,1 2,47
65 76,1 77,1 185 18 6 145 4 M 16 18 3
80 88,9 90,3 200 20 7 160 8 M 16 18 3,79
100 108 109,6 220 20 7 180 8 M 16 18 4,2
114,3 115,9 4,03
125 133 134,8 250 22 7 210 8 M 16 18 5,71
139,7 141,6 5,46
150 159 161,1 285 22 7 240 8 M 20 22 6,72
168,3 170,5 6,57
200 219,1 221,8 340 24 7 295 8 M 20 22 9,31
250 267 270,2 395 26 7 350 12 M 20 22 12,5
273 276,2 11,9
300 323,9 327,6 445 26 7 400 12 M 20 22 13,8
350 355,6 359,7 505 28 7 460 16 M 20 22 20,6
368 372,2 19
400 406,4 411 565 32 7 515 16 M 24 26 27,9
419 423,7 25,9
450 457 462,5 615 38 7 565 20 M 24 26 35,6
500 508 513,6 670 38 7 620 20 M 24 26 41,1
NOTE:
1. Facing according to DIN 2526 
Flat face: 
Form A, Face without any requirements
Form B, Face Rz=160, machined (not smoother than 40µm)
Raised Face: 
Form C, Face Rz=160, machined (not smoother than 40µm)
Form D, Face Rz=40, machined
Form E, Face Rz=16, machined
2. Tongue and groove according to DIN 2512
Form F, Tongue
Form N, Groove 
3. Male and Female according to DIN 2513, DIN 2514
Form V13, V14, Male
Form R13, R16, Female
4. Chemfering for diaphragm-weld packings, PN64-PN400, according to DIN 2695
5. Facing for lens-shaped joints, PN64-PN400, according to DIN 2696

DIN EN 1092-1 PN-40

20191222063727 68920 - DIN 2576 A182 F304L Brida Plana 1 Inch PN16

EN 1092-1 TYPE 01 PN40 PLATE FLANGE
Rated 
Diameter
Pipe Flange Screws Weight
(7,85 Kg/dm3)
d1 k D b d2 Thread Bolt holes KG
15 21,3 22,0 65 95 14 14 M12 4 0,668
20 26,9 27,5 75 105 16 14 M12 4 0,933
25 33,7 34,5 85 115 16 14 M12 4 1,106
32 42,4 43,5 100 140 18 18 M16 4 1,816
40 48,3 49,5 110 150 18 18 M16 4 2,075
50 60,3 61,5 125 165 20 18 M16 4 2,723
65 76,1 77,5 145 185 22 18 M16 8 3,465
80 88,9 90,5 160 200 24 18 M16 8 4,310
100 114,3 116,0 190 235 26 22 M20 8 6,056
125 139,7 141,5 220 270 28 26 M24 8 8,170
150 168,3 170,5 250 300 30 26 M24 8 10,238
200 219,1 221,5 320 375 36 30 M27 12 17,871
250 273,0 276,5 385 450 42 33 M30 12 29,166
300 323,9 327,5 450 515 52 33 M30 16 44,921
350 355,6 359,5 510 580 58 36 M33 16 66,460
400 406,4 411,0 585 660 65 39 M36 16 96,822

* For flanges type 21 the outside hub diameter approximately corresponds to the outside pipe diameter. 
Note : The p/t rating from EN 1092-1 apply only for flange type 05, 11, 12, 13 and 21 having nominal sizes up to and including DN 600. The p/t rating of all other flanges shall be agreed between the manufacturer and the purchaser.

Plate flange PN 16 – acc. to EN 1092-1 type 01

Comparison DIN and EN                                                                                                                                                  
For nominal sizes larger than DN 150, EN standardizes pressure levels PN 10 and PN 16.
From DN 50 to DN 150, the EN refers to the standard series of PN 16 pressure level.
For dimensions up to DN 40, the EN refers to the standard series of PN 40 pressure level.
New in EN 1092-1 are the pressure levels PN 16 and PN 40 for plate flanges.
The European standard EN 1092-1/01 has replaced the national standard DIN 2576 in 2007.

Standards

DIN (old)

DIN 2576 PN 10

   EN (new)

EN 1092-1 type 01 PN 16

In contrast to the DIN standard, EN-1092-1 only specifies the pipe connection dimensions of the ISO series.
It is therefore sufficient to stamp the nominal diameter (DN) for marking purposes.

Dimension range

    DIN 2576 

  DN 10 to 500 

      EN 1092-1

    DN 50 to 1000

(Druckstufe PN 10)                                      (Dimensions for DN < 50 see PN 40)

Designation of the gasket shape

Shape B

Shape A

Seal surface

Machining

Rotaded

Ra (µm)

min. 3,25 / max. 12,5

Rz (µm)

min. 12,5/ max. 50

DIN 2576 Flange Material

Carbon Steel DIN 2576 Flange

ASTM/ASME A/SA105 A/SA105N & A/SA216-WCB, DIN 1.0402, DIN 1.0460, DIN 1.0619, Die Steel, ASTM A105 / ASME SA105, A105N, ASTM A350 LF2 / ASME SA350, High Yield CS ASTM A694 / A694 (F52 F56 F60 F65 F70 F80)

Stainless Steel DIN 2576 Flange

ASTM/ASME A/SA182 F304, F304L, F316, F316L, ASTM/ASME A/SA351 CF8, CF3, CF8M, CF3M, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404, DIN 1.4308, DIN 1.4408, DIN 1.4306, DIN 1.4409

Alloy Steel DIN 2576 Flange

ASTM A182 / ASME SA182 F5, F9, F11, F12, F22, F91

Titanium DIN 2576 Flange

ASTM B381 / ASME SB381, Titanium Gr. 1, Titanium Gr. 2, Titanium Gr. 4, Titanium Gr. 5, Titanium Gr. 7
ASTM R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6 | R52400/GR.7 | R53400/GR.12 | R56320/GR.9 |R56400/GR.5

Copper DIN 2576 Flange

T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc

Copper Nickel DIN 2576 Flange

ASTM / ASME SB 61 / 62 / 151 / 152, Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640

Brass DIN 2576 Flange

3602 / 2604 / H59 / H62 / etc.

Inconel DIN 2576 Flange

ASTM B564 / ASME SB564, Inconel 600, 601, 625, 718, 783, 690, x750 DIN 2576 Flange

Hastelloy DIN 2576 Flange

ASTM B564 / ASME SB564, Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X Flanges

Monel DIN 2576 Flange

ASTM B564 / ASME SB564, Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500)

Alloy 20 DIN 2576 Flange

ASTM B462 / ASME SB462, Carpenter® 20 Alloy, Alloy 20Cb-3

Aluminium DIN 2576 Flange

5052 /6061/ 6063 / 2017 / 7075 / etc.

Nickel DIN 2576 Flange

ASTM B564 / ASME SB564, Nickel 200, Nickel 201, Nickel 205, Nickel 205LC

Duplex DIN 2576 Flange

S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61

Super Duplex DIN 2576 Flange

S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61

Incoloy DIN 2576 Flange

ASTM B564 / ASME SB564, Incoloy 800, 800H, 800HT (UNS N08800), 825 (UNS N08825), 925 Flanges

254 Smo DIN 2576 Flange

ASTM A182 / ASME SA182, SMO 254/6Mo, UNS S31254, DIN 1.4547

Nimonic DIN 2576 Flange

Nimonic 75, Nimonic 80A, Nimonic 90

Other DIN 2576 Flange material

Tin bronze, Alumunum bronze, Lead bronze

Summary
product image
Author Rating
1star1star1star1star1star
Aggregate Rating
5 based on 1 votes
Brand Name
Yaang
Product Name
DIN 2576 A182 F304L Brida Plana 1 Inch PN16
Price
USD 1-9999
Product Availability
Pre-Order Only
PREV
Inquery now

SUBSCRIBE TO OUR NEWSLETTER

FOLLOW US

YouTube
العربية简体中文繁體中文NederlandsEnglishFrançaisDeutschItaliano日本語한국어LatinPortuguêsРусскийEspañolTürkçe
  • Email me
    Mail to us