MSS SP-97 F55 Weldolet 3″ X 1″ Sch40S Class 3000

Type: F55 Weldolet
Material: F55 (UNS S32760/1.4501)
Standard: MSS SP-97
Wall Thickness: SCH 40S
Size: 3″ X 1″ (DN80 X DN25)
Rate: Class 3000

Chemical Composition of F55 (UNS S32760/1.4501)

Weight%	C	Mn	P	S	Si	Cr	Ni	Mo	N	W
Super Duplex F55	0.03 max	1.00 max	0.03 max	0.01 max	1 max	24-26	4.5-6.5	44989	0.25	0.08-0.20

Typical Mechanical Properties of F55 (UNS S32760/1.4501)

Alloy	Tensile Strength N/mm2	Yield Strength 0.2% N/mm2	Elongation	Hardness HB
Super Duplex F55	860	720 min	16 min	270 max

What are weldolets?

Weldolets are the most common of all branch connections, and are welded onto the outlet pipe. The ends are bevelled to facilitate this process, and therefore the weldolet is considered a butt-weld fitting. Weldolet’s are designed to minimize stress concentrations and provide integral reinforcement.

A pipe weldolet makes a 90° branch connection and – comes in full size or reducing for a straight piece of pipe. A weldolet is designated by the run length by the branch length. For example a 1-inch weldolet on a 1-inch pipe would be a 1×1 Weldolet. A weldolet is designed to minimize stress concentrations and provide integral reinforcement without the need for reinforcing the weld.

China Weldolet Manufacturer www.epowermetals.com offers MSS SP-97 F55 Weldolet 3″ X 1″, Sch40S, Class 3000.