China piping solution supplier: www.epowermetals.com

Nonstandard ASTM A240 UNS S32750 Plate Ring Flange Raised Face 381mm X 170mm X 45mm

Standard Mates With ANSI B16.5 Plate Flange
Size range: Mates With ANSI B16.5 Plate Flange 300# 200NB
Pressure range: Mates With 300 LB (Class 300)
Material: 2507 (UNS S32750/F53/SAF 2507)
Flange Facing Types: Raised Face (RF)
Holes: 12 holes with a diameter of 25 mm
Used in: Oil, Offshore, Water, Ship, Natural Gas, Power, Pipe Projects etc

  • PRODUCT DETAIL

Type: Nonstandard Plate Ring Flange
Material: 2507 (UNS S32750/F53/SAF 2507)

Size: Mates With ANSI B16.5 Plate Flange 300# 200NB

  • OD: 381mm
  • ID:170mm
  • THK:45mm

Standard: Mates With ANSI B16.5 Plate Flange
Pressure Class: Mates With 300 LB (Class 300)
Ends: Raised Face (RF)
Holes: 12 holes with a diameter of 25 mm

Chemical Composition % of (UNS32750) 2507

Grade Chemistry (Typical Values) Mechanicals
Specification Cr Ni Mo Cu N W Si Mn P S C Fe UTS 0.20% Elong Hardness PREN
max max max N/mm² Proof % (min) HB (max)
(min) (min)
2507 25 7 3.8 0.75 0.25 0.28 0.8 1.2 0.035 0.02 0.03 Bal 750 500-550 25 270 41

20200805020925 35694 - Nonstandard ASTM A240 UNS S32750 Plate Ring Flange Raised Face 381mm X 170mm X 45mm

ANSI/ ASME B16.5 Plate Ring Flange Raised Face

ANSI, ASME, ASA, B16.5 150lb/sq.in. Plate Ring Flange RF
ø D b g m J k Holes l Kg.
1/2″ 88,9 11,1 34,9 30,2 22,3 60,3 4 15,9 0,400
3/4″ 98,4 12,7 42,9 38,1 27,7 69,8 4 15,9 0,700
1″ 107,9 14,3 50,8 49,2 34,5 79,4 4 15,9 0,800
1 1/4″ 117,5 15,9 63,5 58,8 43,2 88,9 4 15,9 1,100
1 1/2″ 127,0 17,5 73,0 65,1 49,5 98,4 4 15,9 1,400
2″ 152,4 19,0 92,1 77,8 62,0 120,6 4 19,0 2,200
2 1/2″ 177,8 22,2 104,8 90,5 74,7 139,7 4 19,0 3,600
3″ 190,5 23,8 127,0 107,9 90,7 152,4 4 19,0 4,100
3 1/2″ 215,9 23,8 139,7 122,2 103,4 177,8 8 19,0 5,200
4″ 228,6 23,8 157,2 134,9 116,1 190,5 8 19,0 5,600
5″ 254,0 23,8 185,7 163,6 143,8 215,9 8 22,2 6,300
6″ 279,4 25,4 215,9 192,1 170,7 241,3 8 22,2 7,500
8″ 342,9 28,6 269,9 246,1 221,5 298,4 8 22,2 12,600
10″ 406,4 30,2 323,8 304,8 276,3 361,9 12 25,4 18,500
12″ 482,6 31,7 381,0 365,1 327,1 431,8 12 25,5 28,000
14″ 533,4 34,9 412,7 400,0 359,1 476,2 12 28,6 36,000
16″ 596,9 36,5 469,9 457,2 410,5 539,7 16 28,6 46,000
18″ 635,0 39,7 533,4 504,8 461,8 577,8 16 31,7 50,000
20″ 698,5 42,9 584,2 558,8 513,1 635,0 20 31,7 64,000
22″ 749,3 46,0 641,2 609,6 564,4 692,1 20 34,9 72,000
24″ 812,8 47,6 692,1 663,6 615,9 749,3 20 34,9 89,000

NOTE:

  • 1. Class 150 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
  • 2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
  • 3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
  • 4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
  • 5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.
ANSI, ASME, ASA, B16.5 300lb/sq.in. Plain flange/Plate Flange RF
ø D b g m J k Holes l Kg.
1/2″ 95,6 14,3 34,9 38,1 22,3 66,7 4 15,9 0,700
3/4″ 117,5 15,9 42,9 47,6 27,7 82,5 4 19,0 1,100
1″ 123,8 17,5 50,8 54,0 34,5 88,9 4 19,0 1,400
1 1/4″ 133,3 19,0 63,5 63,5 43,2 98,4 4 19,0 1,800
1 1/2″ 155,6 20,6 73,0 69,8 49,5 114,3 4 22,2 2,600
2″ 165,1 22,2 92,1 84,1 62,0 127,0 8 19,0 3,400
2 1/2″ 190,5 25,4 104,8 100,0 74,7 149,2 8 22,2 4,400
3″ 209,5 28,6 127,0 117,5 90,7 168,3 8 22,2 6,100
3 1/2″ 228,6 30,2 139,7 133,3 103,4 184,1 8 22,2 7,500
4″ 254,0 31,7 157,2 146,0 116,1 200,0 8 22,2 10,100
5″ 279,4 34,9 185,7 177,8 143,8 234,9 8 22,2 12,500
6″ 317,5 36,5 215,9 206,4 170,7 269,9 12 22,2 14,100
8″ 381,0 41,3 269,9 260,3 221,5 330,2 12 25,4 24,800
10″ 444,5 47,6 323,8 320,7 276,3 387,3 16 28,6 37,100
12″ 520,7 50,8 381,0 374,6 327,1 450,8 16 31,7 50,000
14″ 584,2 54,0 412,7 425,4 359,1 514,3 20 31,7 70,000
16″ 647,7 57,1 469,9 482,6 410,5 571,5 20 34,9 90,000
18″ 711,2 60,3 533,4 533,4 461,8 628,6 24 34,9 112,000
20″ 774,7 63,5 584,2 584,2 513,1 685,8 24 34,9 133,000
22″ 838,2 66,7 641,2 641,2 564,4 742,9 24 41,3 197,000
24″ 914,4 69,8 692,1 701,7 615,9 812,8 24 41,3 208,000

NOTE:

  • 1. Class 300 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
  • 2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
  • 3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
  • 4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
  • 5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.
ANSI, ASME, ASA, B16.5 600lb/sq.in. Plate Flange RF
ø D b g m J k Holes l Kg.
1/2″ 95,2 14,3 34,9 38,1 22,3 66,7 4 15,9 0,800
3/4″ 117,5 15,9 42,9 47,6 27,7 82,5 4 19,0 1,400
1″ 123,8 17,5 50,8 54,0 34,5 88,9 4 19,0 1,600
1 1/4″ 133,3 20,6 63,5 63,5 43,2 98,4 4 19,0 2,100
1 1/2″ 155,6 22,2 73,0 69,8 49,5 114,3 4 22,2 3,100
2″ 165,1 25,4 92,1 84,1 62,0 127,0 8 19,0 3,700
2 1/2″ 190,5 28,6 104,8 100,0 74,7 149,2 8 22,2 5,400
3″ 209,5 31,7 127,0 117,5 90,7 168,3 8 22,2 7,300
3 1/2″ 228,6 34,9 139,7 133,3 103,4 184,1 8 25,4 8,900
4″ 273,0 38,1 157,2 152,4 116,1 215,9 8 25,4 11,800
5″ 330,2 44,4 185,7 188,9 143,8 266,7 8 28,6 24,500
6″ 355,6 47,6 215,9 222,2 170,7 292,1 12 28,6 29,500
8″ 419,1 55,6 269,9 273,0 221,5 349,2 12 31,7 43,000
10″ 508,0 63,5 323,8 342,8 276,3 431,8 16 34,9 70,000
12″ 558,8 66,7 381,0 400,0 327,1 488,9 20 34,9 86,000
14″ 603,2 69,8 412,7 431,8 359,1 527,0 20 38,1 100,000
16″ 685,8 76,2 469,9 495,3 410,5 603,2 20 41,3 142,000
18″ 742,9 82,5 533,4 546,1 461,8 654,0 20 44,4 175,000
20″ 812,8 88,9 584,2 609,6 513,1 723,9 24 44,4 232,000
22″ 869,9 95,2 641,2 666,7 564,4 777,9 24 47,6 292,000
24″ 939,8 101,6 692,1 717,5 615,9 838,2 24 50,8 330,000

NOTE:

  • 1. Class 600 flanges except Lap Joint will be furnished with 0.25 (6.35mm) raised face, which is not included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
  • 2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
  • 3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
  • 4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
  • 5. Dimensions of sizes 1/2 through 3 1/2 are the same as for Class 400 Flanges.
  • 6. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.

Application

  • Bicycle and automobile exhaust tubing, cooling pipe, Electroplating equipment, precision instruments, ring, environmental protection equipment
  • Thermal power engineering:condenser, heat exchanger, engine vane
  • Vessels:Running pipes, submersible, gas cylinder
  • Oceaneering: evaporator, heat transmitter, exchanger, oil production platform, oil cooler
  • Chemical engineering:Flat plate heat exchanger, flat plate condenser, cooler tower, chloride barrels
  • Aerospace:Engine, fan plate, gas compressor vane, rack, hatch cover, empennage

Summary
nonstandard astm a240 uns s32750 plate ring flange raised face 381mm x 170mm x 45mm - Nonstandard ASTM A240 UNS S32750 Plate Ring Flange Raised Face 381mm X 170mm X 45mm
Author Rating
1star - Nonstandard ASTM A240 UNS S32750 Plate Ring Flange Raised Face 381mm X 170mm X 45mm1star - Nonstandard ASTM A240 UNS S32750 Plate Ring Flange Raised Face 381mm X 170mm X 45mm1star - Nonstandard ASTM A240 UNS S32750 Plate Ring Flange Raised Face 381mm X 170mm X 45mm1star - Nonstandard ASTM A240 UNS S32750 Plate Ring Flange Raised Face 381mm X 170mm X 45mm1star - Nonstandard ASTM A240 UNS S32750 Plate Ring Flange Raised Face 381mm X 170mm X 45mm
Aggregate Rating
5 based on 1 votes
Brand Name
Yaang
Product Name
Nonstandard ASTM A240 UNS S32750 Plate Ring Flange Raised Face 381mm X 170mm X 45mm
USD 1-9999
Product Availability
Pre-Order Only
PREV
Inquery now

SUBSCRIBE TO OUR NEWSLETTER

FOLLOW US

YouTube
العربية简体中文繁體中文NederlandsEnglishFrançaisDeutschItaliano日本語한국어LatinPortuguêsРусскийEspañolTürkçe
  • Email me
    Mail to us