Pipe Coupling

Size: 1/2"-48"
Wall thickness: SCH5S-SCHXXS
Material: Special Alloy, Super Duplex Stainless Steel, Stainless Steel, Carbon Steel, Titanium
Standards: ASME B16.9, ASME B16.28, MSS SP43, MSS SP75

PRODUCT DETAIL
Material

The pipe coupling is a short tube used to connect two pipes. Because of its convenient use, pipe coupling is widely used in civil construction, industry, agriculture, and other fields.

Epower Metals has 3 warehouses in Wenzhou, Wuxi and Hebei. As one of the piping solution suppliers, Epower Metals has been committed to providing one-stop solutions for projects in the fields of oil and gas, water, renewable energy, and infrastructure. With years of consistent dedication and innovation, our reliable, cost-effective, and environment-friendly solutions have won clients wide recognition.
China Pipe Couping manufacturer Epower Metals supplies Pipe Couplings, Tube Couplings, Coupling Pipe Fittings in kinds of materials such as carbon steel, stainless steel, alloy steel, titanium, etc.

Pipe Coupling Dimensions

Socket Weld Coupling Dimensions

NOMINAL PIPE SIZE	OUTER DIAMETER	SOCKET BORE DIAMETER	BORE DIAMETER OF FITTINGS	BORE DIAMETER OF FITTINGS	BORE DIAMETER OF FITTINGS	WALL THICKNESS # 3000	WALL THICKNESS # 3000	WALL THICKNESS # 6000	WALL THICKNESS # 6000	WALL THICKNESS # 9000	WALL THICKNESS # 9000	FULL COUPLING	FULL COUPLING	HALF COUPLING	HALF COUPLING
Inch.	A	B	C – 3000	C – 6000	C – 9000	D	D	D	D	D	D	L1	L2	L1	L2
		Maximum Minimum	Maximum Minimum	Maximum Minimum	Maximum Minimum	Average	Minimum	Average	Minimum	Average	Minimum
1/8	B+D	11.2 10.8	7.6 6.1	4.8 3.2		3.18	3.18	3.96	3.43			9.5	6.5	9.5	16.0
1/4	B+D	14.6 14.2	10.0 8.5	7.1 5.6		3.78	3.30	4.6	4.01			9.5	6.5	9.5	16.0
3/8	B+D	18.0 17.6	13.3 11.8	9.9 8.4		4.01	3.50	5.03	4.37			9.5	6.5	9.5	17.5
1/2	B+D	22.2 21.8	16.6 15.0	12.5 11.0	7.2 5.6	4.67	4.09	5.97	5.18	9.35	8.18	9.5	9.5	9.5	22.5
3/4	B+D	27.6 27.2	21.7 20.2	16.3 14.8	11.8 10.3	4.90	4.27	6.96	6.04	9.78	8.56	12.5	9.5	12.5	24.0
1	B+D	34.3 33.9	27.4 25.9	21.5 19.9	16.0 14.4	5.69	4.98	7.92	6.93	11.38	9.96	12.5	12.5	12.5	28.5
1 1/4	B+D	43.1 42.7	35.8 34.3	30.2 28.7	23.5 22.0	6.07	5.28	7.92	6.93	12.14	10.62	12.5	12.5	12.5	30.0
1 1/2	B+D	49.2 48.8	41.6 40.1	34.7 33.2	28.7 27.2	6.35	5.54	8.92	7.8	12.7	11.12	12.5	12.5	12.5	32.0
2	B+D	61.7 61.2	53.3 51.7	43.6 42.1	38.9 37.4	6.93	6.04	10.92	9.5	13.84	12.12	16.0	19.0	16.0	41.0
2 1/2	B+D	74.4 73.9	64.2 61.2			8.76	7.67					16.0	19.0	16.0	43.0
3	B+D	90.3 89.8	79.4 76.4			9.52	8.30					16.0	19.0	16.0	44.5
4	B+D	103.8 100.7	103.8 100.7			10.69	9.35					16.0	19.0	16.0	48.0
	All Dimensions are in mm

Threaded Coupling Dimensions

NOMINAL PIPE SIZE	END TO END		MINIMUM LENGTH OF THREAD		OUTSIDE DIAMETER
Inch.	Full Coupling	Half Coupling			# 3000	# 6000
	A	A/2	B	C	D	D
1/8	32	A/2	6.7	6.4	16	22
1/4	35	A/2	10.2	8.1	19	25
3/8	38	A/2	10.4	9.1	22	32
1/2	48	A/2	13.6	10.9	28	38
3/4	51	A/2	13.9	12.7	35	44
1	60	A/2	17.3	14.7	44	57
1 1/4	67	A/2	18	17	57	64
1 1/2	79	A/2	18.4	17.8	64	76
2	86	A/2	19.2	19	76	92
2 1/2	92	A/2	28.9	23.6	92	108
3	108	A/2	30.5	25.9	108	127
4	121	A/2	33	27.7	140	159
	All Dimensions are in mm

Pipe Fittings Dimensions Tolerance as per ASME B16.9

NOMINAL PIPE SIZE	ALL FITTINGS	ALL FITTINGS	ALL FITTINGS	ELBOWS AND TEES	180 DEG RETURN BENDS	180 DEG RETURN BENDS	180 DEG RETURN BENDS	REDUCERS	CAPS
NPS	O.D. at Bevel (1), (2)	I.D. at End (1), (3), (4)	Wall Thickness (3)	Centre-to-End Dimension A,B,C,M	Centre-to-Centre O	Back-to-Face K	Alignment of Ends U	Overall Length H	Overall Length E
½ to 2½	0.06 -0.03	0.03	Not less than 87.5% of nominal thickness	0.06	0.25	0.25	0.03	0.06	0.12
3 to 3 ½	0.06	0.06	Not less than 87.5% of nominal thickness	0.06	0.25	0.25	0.03	0.06	0.12
4	0.06	0.06	Not less than 87.5% of nominal thickness	0.06	0.25	0.25	0.03	0.06	0.12
5 to 8	0.09 -0.06	0.06	Not less than 87.5% of nominal thickness	0.06	0.25	0.25	0.03	0.06	0.25
10 to 18	0.16 -0.12	0.12	Not less than 87.5% of nominal thickness	0.09	0.38	0.25	0.06	0.09	0.25
20 to 24	0.25 -0.19	0.19	Not less than 87.5% of nominal thickness	0.09	0.38	0.25	0.06	0.09	0.25
26 to 30	0.25 -0.19	0.19	Not less than 87.5% of nominal thickness	0.12	…	…	…	0.19	0.38
32 to 48	0.25 -0.19	0.19	Not less than 87.5% of nominal thickness	0.19	…	…	…	0.19	0.38

NOMINAL PIPE SIZE NPS	ANGULARITY TOLERANCES	ANGULARITY TOLERANCES	ALL DIMENSIONS ARE GIVEN IN INCHES. TOLERANCES ARE EQUAL PLUS AND MINUS EXCEPT AS NOTED.
	Off Angle Q	Off Plane P	(1) Out-of-round is the sum of absolute values of plus and minus tolerance. (2) This tolerance may not apply in localized areas of formed fittings where increased wall thickness is required to meet design requirements of ASME B16.9. (3) The inside diameter and the nominal wall thicknesses at ends are to be specified by the purchaser.(4) Unless otherwise specified by the purchaser, these tolerances apply to the nominal inside diameter, which equals the difference between the nominal outside diameter and twice the nominal wall thickness.
½ to 4	0.03	0.06
5 to 8	0.06	0.12
10 to 12	0.09	0.19
14 to 16	0.09	0.25
18 to 24	0.12	0.38
26 to 30	0.19	0.38
32 to 42	0.19	0.50
44 to 48	0.18	0.75