Best china piping solution supplier: www.epowermetals.com

Socket Weld Tee

Size: 1/2"-48"
Wall thickness: SCH5S-SCHXXS
Material: Special Alloy, Super Duplex Stainless Steel, Stainless Steel, Carbon Steel, Titanium
Standards: ASME B16.9, ASME B16.28, ASME B16.11, MSS SP43, MSS SP75

  • PRODUCT DETAIL
  • MATERIAL

Name: Socket welding tee
Specification: DN6, DN8, DN10, DN15, DN20, DN25, DN32, Dn40, DN50, DN65, DN80, DN100. The commonly used order specification is dn15-dn50. If there are out of the scope of the specification, you can communicate with the customer about the design and processing of drawings.
Pressure: 3000lb, 6000lb, 9000lb or sch80, sch160, XXS
Material: Carbon steel (CS), stainless steel (SS), alloy steel (AS)
Standards: GB/T14383-93, GB/T14383-2008, American Standard ASME B16.11, petrochemical standard SH3410, Ministry of chemical industry standard HG/T21634, etc
Socket welding tee is a kind of high-pressure pipe connection fitting, which is mainly formed by forging blank of round steel or ingot, and then processed by lathe.
What’s the difference between a butt tee and a socket tee?
Socket welding: extend the pipe into the valve body for welding, mostly used for the welding of carbon steel pipe and stainless steel pipe below 2 “;
Butt welding: using resistance heat to weld two workpieces along the whole end face at the same time, which is widely used in the welding of workpieces.
Difference between socket welding and butt welding:

  • 1. Socket weld forms fillet weld, butt weld forms butt weld. Butt welding is better than socket welding in strength and stress condition, so butt welding should be used in high pressure situation and bad field.
  • 2. Socket welding is generally used for small pipe diameter less than or equal to Dn40, such as small-diameter valve and pipe, pipe fitting and pipe welding, which is more economical. Butt welding is generally used for those above Dn40.
  • 3. Most of the lower caliber and smaller pressure rating are socket welding, while those with higher pressure rating are butt welding. And the butt welding needs 100% flaw detection test to ensure no leakage.
  • 4. Socket welding requires a difference in diameter to insert welding, butt welding is not required.
  • 5. The requirement of butt welding is generally higher than that of socket welding, and the quality is good after welding, so the detection method is relatively strict. Butt welding shall be subject to radiographic inspection, while socket welding shall be subject to magnetic particle or penetration inspection (such as carbon steel for magnetic particle and stainless steel for penetration).

Socket Weld Tee

Socket Weld Tee

Summary
product image
Author Rating
1star1star1star1star1star
Aggregate Rating
5 based on 1 votes
Brand Name
Epower Metals
Product Name
Socket Weld Tee
Price
USD 1-9999
Product Availability
Pre-Order Only

MATERIAL

Special Alloys

  • HASTELLOY® X
  • MONEL® R-405
  • MONEL® K-500
  • HASTELLOY® C-276
  • HASTELLOY® C-22
  • HASTELLOY® B-2
  • INCOLOY® 825
  • INCOLOY® 800H / 800HT®
  • INCONEL® 718
  • INCONEL® ALLOY 625
  • INCONEL® ALLOY 601
  • INCONEL® ALLOY 600
  • MONEL® ALLOY 400

ALLOY 20

  • NICKEL 200/201
  • MONEL® R-405
  • MONEL® K-500
  • MONEL® ALLOY 400
  • INCONEL® 718
  • INCONEL® ALLOY 625
  • INCONEL® ALLOY 601
  • INCONEL® ALLOY 600
  • INCOLOY® 825
  • HASTELLOY® X
  • HASTELLOY® C-276
  • HASTELLOY® C-22
  • HASTELLOY® B-2
  • INCOLOY® 800H / 800HT®
  • HASTELLOY® B-3

Duplex Stainless Steel

  • ZERON® 100, SUPER DUPLEX STAINLESS STEEL
  • Super Duplex S32760
  • LDX 2101®, DUPLEX STEEL
  • Duplex S31803
  • SUPER DUPLEX 2507
  • DUPLEX 2205

Stainless Steel

  • STAINLESS STEEL NITRONIC 50HS
  • STAINLESS STEEL NITRONIC 60
  • STAINLESS STEEL NITRONIC 50
  • STAINLESS STEEL 13-8PH
  • STAINLESS STEEL 15-5PH
  • STAINLESS STEEL PRODEC 303
  • STAINLESS STEEL 303
  • STAINLESS STEEL 446
  • STAINLESS STEEL 410S
  • STAINLESS STEEL 410
  • STAINLESS STEEL 304-304H
  • STAINLESS STEEL 17-4
  • STAINLESS STEEL 347
  • STAINLESS STEEL 440C
  • STAINLESS STEEL 309
  • STAINLESS STEEL 316-316l
  • STAINLESS STEEL AL-6XN®
  • STAINLESS STEEL 330
  • STAINLESS STEEL 321
  • 317L STAINLESS STEEL
  • STAINLESS STEEL 310/310S
  • Stainless Steel 304L
  • Stainless Steel 304
  • STAINLESS STEEL 253 MA

Carbon Steel

  • CARBON STEEL PRODUCTS

Titanium

  • 10V-2Fe-3Al
  • 6Al-4V
  • 6Al-4V STA
  • 6Al-4V ELI
  • 6Al-2Sn-4Zr-2Mo

PREV
NEXT
Inquery now

SUBSCRIBE TO OUR NEWSLETTER

FOLLOW US

YouTube
العربية简体中文繁體中文NederlandsEnglishFrançaisDeutschItaliano日本語한국어LatinPortuguêsРусскийEspañolTürkçe
  • Email me
    Mail to us